[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: LaserWriter Select 360 on a G4
- Subject: Re: LaserWriter Select 360 on a G4
- From: "Mark Cummings" <figjams@primus.com.au>
- Date: Tue, 27 Nov 2001 22:24:02 +1000
- Newsgroups: comp.sys.apple2
- Organization: iPrimus Customer - reports relating to abuse should be sent to abuse@iprimus.com.au
- References: <Xns9163899C758BDaveAMS@216.166.71.234>
- Xref: archiver1.google.com comp.sys.apple2:15226
If I can print to my LaserWriter Select 360 from my PC via 10Base2 -
Ethernet & Localtalk Bridged Mac and Appletalk, then I guess you could from
you G4.
I can also print to it from any Appletalked IIGS's or 68K Mac's at the same
time, but that's another story.
Sounds like you need a more capable dumb Mac than the one you have :)
BTW I use a Mac Quadra605 for the LocalTalk Bridge, they are pretty cheap
these days.
LocalTalk Bridge software is free to download from Apple's ftp site if you
can find it.
the file you need is: "LocalTalk Bridge 2.1.smi" or is that .sit ?
Mark
----------
In article <Xns9163899C758BDaveAMS@216.166.71.234>, DaveAMS
<noone@nowhere.org> wrote:
>I'm trying to get a LaserWriter Select 360 to work on a G4. I've been told
>that the only way to do this is a LocalTalk to Ethernet Bridge. Is this
>correct? Anyone done this?