Re: Update: Win2k to IIgs

["Tim Haynes" <trhaynes@yahoo.SPAMBGONE.com>]

Good stuff, William!  It's exciting to get the IIgs networked, eh?  :)

Your network problems could be either from the IIgs side or the Mac side.
It's been a while since I was doing any networking on a Mac, but I recall
having to enable sharing on the Mac volume, and specifying that the guest
could see it.  And on the IIgs side, I had to have the port set up properly
(ROM01 and ROM03 AppleTalk port setup differences: slot 1 or 2 set to "your
card"/Slot 7 set to "AppleTalk" - for ROM01.  Slot 1 or 2 set to "AppleTalk"
for ROM03.)  On the IIgs, you have install the AppleShare extension from the
Sys 6.0.1 installer.

Were you ever able to see the Mac from the IIgs but now it's not working, or
were you not ever able to see it?

Cheers!
Tim

"william strutts" <wrstrutts1@nospam.home.com> wrote in message
news:07mD7.208949$K6.102735842@news2...
> Okay,
>
> I now have an ethernet adapter for my Mac Performa 575. I have
> loaded up the network adapter drivers and I have PC MacLAN
> running on my Win2k box. I can now get to my Win2k box from
> the Mac!!!!  I can also get to the Internet from the Mac!!! Yeah!
> However, the connection to my IIgs seems broken now. I have the
> Appletalk Network box configured to Ethertalk but I have loaded
> up Localtalk Bridge which should allow the IIgs to connect to the
> Mac. However, when I go into my IIgs, I don't see any Appletalk
> servers anymore. I should see two of them: Windows 2000 and
> my Perform 575.  What am I missing here?
>
> --
> --
> William R. Strutts - wrstrutts1@nospam.home.com - Whatever!
>
> C'est moi!  http://www.facelink.com/wrstrutts
>
> Just hacking away...
>
> Remove nospam to reply.
>
>