[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Unknown cards

Subject: Re: Unknown cards
From: Wayne Stewart <waynes@intergate.bc.ca>
Date: Fri, 14 Sep 2001 17:31:19 -0700
Newsgroups: comp.sys.apple2
Organization: Posted via Supernews, http://www.supernews.com
References: <20010914002233.21679.00000185@mb-cv.aol.com>
Xref: archiver1.google.com comp.sys.apple2:13273

PetBJr wrote:

> I have two cards for the Apple ll GS. The first is a APPLIED ENGINEERING
> RAMFACTOR with a 50 pin connector on it. The other is a smaller card that has
> XEBEC printed on it, also it has a 49 pin connector on it. ( could it be a
> printer card? )

The RamFactor is a RAM card. It can hold from 64k to 1mb RAM. It could also
also be hooked up to a power supply and booted from. AppleWorks can be patched
to
use the card. Type in PR#X to access the built-in utility(X is the slot #). If
you want a
pdf of the manual email me.

The Xebec card is a SASI card for the old Sider hard drives. SASI was sort of
preSCSI.
Quite a number of people have tried to modify the card into a SCSI card over the
years.
Haven't heard of anyone succeeding yet.

    Wayne

References:
- Unknown cards
  - From: petbjr@aol.com (PetBJr)

Prev by Date: Re: Looking for apple /// image files
Next by Date: Re: Patch for Appleworks 2.0 for Ramworks?
Previous by thread: Re: Unknown cards
Next by thread: Patch for Appleworks 2.0 for Ramworks?
Index(es):
- Date
- Thread