Re: How Do I Connect Apple IIe to Panasonic Printer?

["william strutts" <wrstrutts1@nospam.home.com>]

<penman-no-spam@cotse.com> wrote in message
news:cGVubWFu.491f6b161659f26cc24b5db5ccfde0e3@1000144784.cotse.com...
> Printers are Joe Kohn's area of expertise, but maybe I can help:
> All you need is a parallel printer card in your //e--usually placed
> in slot 1.  Depending on what you're printing (and I can't remember
> if this particular Panasonic printer is a NLQ 24-pin model or not)
> you may need printer drivers.  For example, if you're using
> AppleWorks, there's a printer driver for the Panasonics that'll give
> you NLQ output;  the disk the driver's on can be ordered from Joe
> Kohn or downloaded from the trenco FTP site.
>
> Penman
>
>

I think most Panasonics had some kind of Epson compatibility.
I had a Panasonic KXP-1091 that you could run using Epson
FX-80 mode or something like that.

--
--
William R. Strutts - wrstrutts1@nospam.home.com - Whatever!

C'est moi!  http://www.facelink.com/wrstrutts

Just hacking away...

Remove nospam to reply.