Re: super serial card II

["william strutts" <wrstrutts1@home.com>]

Printer Mode

SW1
Switches 1-4 set BAUD rate
Switches 5-6 Mode (Printer or Modem)
Switche 7 RS232C Signals

SW2
Switch 1 Stop Bits
Switch 2 Delay after CR
Switch 3-4 Line Width
Switch 5 Line Feed
Switch 6 Interrupts
Switch 7 RS232C Signals

Modem Mode

SW1
Switches 1-4 set BAUD rate
Switches 5-6 Mode (Printer or Modem)
Switche 7 RS232C Signals

SW2
Switch 1 Stop Bits
Switch 2 Data Bits
Switch 3-4 Parity
Switch 5 Line Feed
Switch 6 Interrupts
Switch 7 RS232C Signals

BAUD Rate(SW1 1-4)

300    on off off on
1200  off on on on
2400  off on off on
4800  off off on on
9600  off off off on
19200 off off off off

Printer Mode(SW1 5-6)   off on
Modem Mode(SW1 5-6) on on

PARITY(SW2 2-3)

none   on on
Odd   on off
Even   off off

LINE WIDTH(SW2 2-3)
40  on  on
72  on off
80  off on
132 off off
--
--
William R. Strutts - wrstrutts1@home.com - Whatever!

C'est moi!  http://www.facelink.com/wrstrutts

Just hacking away...
"Charles A Beener" <cabeener@mail.bright.net> wrote in message
3B48702D.5660@mail.bright.net">news:3B48702D.5660@mail.bright.net...
> I'm needing the switch setup for this serial card.
> I don't need the manual just the dip switch setings for the card
>
>   any help would be appreciated.
>                                   Charles