Re: Apple Integer BASIC firmware card

[<ikanja@yahoo.it>]

agentwd40 ha scritto nel messaggio ...
>
>The integer rom card does work in a IIe. You will loose what ever ram
>the inhibit signal turns off, but few if any integer basic programs
>use more than 48k of ram anyway. There is a small patch that you apply
>to your boot disk so dos will look for integer in slot x instead of
>slot 0. or you can use two pokes to reasign the int location.
>
I tougth that the IIe already had built-in Integer Basic. What would be
the use of that card?


Igor