[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Commodore 1901 monitor for IIgs?
- Subject: Re: Commodore 1901 monitor for IIgs?
- From: "Jonathyn Bet'nct" <jonrelay@napanet.net>
- Date: Fri, 15 Jun 2001 15:41:54 -0700
- Newsgroups: comp.sys.apple2
- Organization: Newsfeeds.com http://www.newsfeeds.com 80,000+ UNCENSORED Newsgroups.
- References: <wm8W6.132175$ff.991960@news-server.bigpond.net.au>
- Xref: archiver1.google.com comp.sys.apple2:9093
"ralmin" <xbiber@bigpond.net.au> wrote in message
news:wm8W6.132175$ff.991960@news-server.bigpond.net.au...
> Alternately, could you design a cable to connect the RGB connectors?
>
> The pin-out for this 9-pin connector is according to my Commodore 128's
> manual:
>
> Pin Signal
> ...
I did this. I had an extra 9-pin socket hanging around, so I attached a
bunch of wires to it, put it in one of the port connectors on the back, ran
the wires through the hole for the power cord, plugged the wires into the
little holes in the RGB port, and hooked up my Commodore 1084S monitor to
it. :-)
I'm armed with pinouts if you need them (Commodore, Macintosh, IIgs; I'm
going to see if I can find VGA).
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 80,000 Newsgroups - 16 Different Servers! =-----