Re: Where to get RAM for IIGS

["Ryan Tremblay" <ryan@1st.net>]

Ok I happen to find a 286 in my basement that got donated to the Internet
Club from the college I attended (long story) anyway I took the chips out
and added them to the IIGS RAM Expansion card.  I turned it on and it will
not recognize it.   I noticed on the chips  the soldered on ones say TMS
4256-15NLA on the top and EHP 8749 and an A on the bottom.  The ones I put
in say  TMS 4256-12NL on the top and EGP 8740 on the next line and nothing
after that.  I assume it needs the same specs on the ram I put it for it to
work?  I also noticed I had some inserted than the rest of them are I was
curios if that was the problem but I fixed it and still no luck.  Is it
better off buying another board with more RAM?  Please help.

Ryan
"Ryan Tremblay" <ryan@1st.net> wrote in message
news:8QVt6.616$RU2.7673@news...
> I just got the Print Shop and Companion for the IIGS print shop runs fine
> but the companion comes up and says cannot find 640K of ram and quits.
> There is an expansion card in it now I need to know where to get the chips
> to put on the card?  Does anyone of a reasonable price I can get these so
I
> can run this program?  Any help would appreciated.  I looked on EBAY but
> alot of them were only 256K cards.  Thanks
>
> Ryan Tremblay
> ryan@1st.net
>
>
>