Re: Diamond Trackstar; Apple2-on-a-board for a PC

[Wayne Stewart <waynes@intergate.bc.ca>]

Bart wrote:

> Thank You Wayne!  and a further query:
> >I have the origional Floppy for the Tracksar E  version 1.5
>
> Wayne could we mayhaps get together on this?
> email to ---  barpri  followed by an uppercase 2 on a QWERTY board with a
> sufix of wvi period com will reach me

Don't know if I'm addressing this correctly so I'll post it as well on comp.sys
apple2
if I don't reach you by email, you can email me at waynes@intergate.ca


> >Molex - - db9
> >1 - - - - - - 1
> >2 - - - - - - 7
> >3 - - - - - - 3
> >4 - - - - - - 4
> >5 - - - - - - 5
> >6 - - - - - - 6
> >7 - - - - - - 8
> >8 - - - - - - 9
> >there's also a ground wire that goes to the outside of the db9 plug
> >pin2 of the db9 has no connection
>
> IS this facing the plug (ie from the side that plugs in or, is it from the
> solder side?

The pins on all  db9 plugs should all be numbered. Male DB9 plugs
are always numbered on the pin side from left to right starting at the top
left with the longer row at the top.

    Wayne