Re: Transwarp card for //e

[John L <jdl@biogate.com>]

On Wed, 21 Feb 2001 10:41:21 -0600, Roy and/or Janet Miller
<millers@inetnebr.com> wrote:


>One thing that you haven't told us is what other cards you have in those
>machines. The TW draws a lot of power, and if you have too many cards
>pulling too much power, it's possible that the II just won't boot.

Slot#1: Parallel Printer card
Slot#2: Super Serial card II
Slot#3: Transwarp //e
Slot#4: Apple // Mouse card
Slot#5: Unidisk 3.5" controller card
Slot#6: Apple 5.25" controller card 
Slot#7: Z-80 CP/M card

NOTE: System works fine without Transwarp card installed.

I tried removing all the cards except the Transwarp.  Same problem as
before - system won't  boot.  Maybe the Power supply is the problem ?



John