Re: Apple IIe Video

[Mike Pfaiffer <pfaiffer@mts.net>]

Krack wrote:
> 
> I have an small old apple monitor that only does two colors (green and
> black). When I run the disk images in my emulator I see COLORS. How can I
> connect my apple to my TV? I have a ti99 with a RF adapter but it does not
> seem to work with my apple. I also have a Atari 2600 with a different RF
> adapter (still no luck with the apple). Any advise would be great.
> 
> Thanks
> 
> BTW this group has been a wonderful source if information and I would like
> to thank everyone for there help in the future/past.

	RF adaptors should work. It's been a while since I had a ][+ or //e
clone to work with. There are some internal connectors near slot 7 or
the external one (the NTSC/RCA jack) which I seem to recall are useable.
I think it is possibly unidirectional so you'll have to make sure you
are connecting the correct jacks together. After this you'll have to
connect it to an input selector (the device which takes input from the
RF modulator (or game) and allows output to a TV). I could be wrong, but
doesn't the ATARI have a built in RF modulator...

				Later
				Mike




-- 
+-----------------------------------------------------------------------+
|   Digital Civilization magazine: http://www.digitalcivilization.ca   
|
|      http://www.mts.net/~pfaiffer = Mike Pfaiffer (B.A., B.Sc.)      
|
|  See my web page before you think about spamming me. I charge cash.  
|
+-----------------------------------------------------------------------+
----- BEGIN GEEK CODE BLOCK -----
Version: 3.12
GCS/G/IT/PA/SS d s+:- a? C++ UL L++ W++ N++ o+ K- w(---) O+@ M++@ V PS+
PE !PGP t+ 5+ X R tv b+ DI+++ D++ G e++* h! r-- !y-- UF++
------ END GEEK CODE BLOCK ------