Re: Basic comms program for GS

[Greg Buchner <nobody@wavetech.net>]

In article <3A7C7232.6AC5275@swbell.net>, Rubywand 
<rubywand@swbell.net> wrote:

> Can your PowerMac emulate a PC running MS-DOS? If it can, you may be able
> to use ADTgs. (Not sure about the Mac version of ADT-- it's probably 
> intended
> for 68k Macs and, even then, there do not seem to be any reports of 
> success
> using MacADT.)  For more about these packages and where to get them, see
> http://home.swbell.net/rubywand/Csa2T1TCOM.html .

There is a shareware program called ][2Mac which seems to do a lot of
the same functions.  The web page can be found through:

http://macadam.dyndns.org/

I never used it as I always had my GS networked to my Mac, first on
Localtalk on both system, then through a Kinetics Fastpath router
once I went to ethernet on my Macs...

Greg B.
-- 
Note:  To e-mail me, replace nobody with gjb
I don't get junk e-mail and intend to keep it that way.
If you want to send me spam, go jump off a cliff and make
the world a nicer place.