SSC probs

["Dave H. Hassler" <dhassler@OregonVOS.net>]

Hey gang.  Having trouble with a Super Serial Card.  I have the switches
set right, HWHS cable, etc.  IBM 7855-10 9600 bps modem (same results with
an old
Supra2400).  Using Kermit 0.65 under ProDOS 1.9 on an unenhanced IIe
(1982).

Here's the situation: Once Kermit is fired up, I can send commands to the
modem, and, by the status lights, I can tell it's responding, but nothing
appears on the A2 screen (like AT&V and the modem's TX light goes solid
for a full sec.); I can send an ATD command to the modem and it
dials just fine.

Now the weird part: I get a CONNECT 9600 message and a USERNAME: prompt
from my UNIX shell account, but after that, nothing.  Sometimes, the
keyboard freezes up at that point, too.  I tried sending a CTRL-A E E to
the card beforehand, and later adding a CTRL-A 3S command to force the
80-col. card, but still no dice.

Any leads or suggestions appreciated,

Dave Hassler
dhassler@orednet.org   --   dhassler@eaglenewspapers.com
Fishhack, poet, volleyball coach, guitar player