Re: another newbie ADT quest

["Phoenyx" <quazar@dcnet2000.com>]

>      To actually make the mechanical connection to a 9-pin COM port on
>      the 
> PC, you will need whatever combination of cables and adaptors it takes
> to get  from a 25-pin connection on the SSC to a 9-pin COM port
> connector for the PC. Usually PC com ports (9-pin or 25-pin) expect the
> cable to have a female connector. (This helps protect against plugging
> into the PC printer port by mistake.)

The possible variety of connection material required is why I prefer
making my own cable. I have two that I use. One for the 2c and one for the
SSC. Someday when the need arises, I will make one for my GS.

Cables are really easy to make. For the novice, Radio Shack supplies the
various sets in a crimp style solderless package for only a couple of
bucks. Likewise, you can find a variety of wiring with different strand
counts. Of course, each Radio Shack inventory seems to vary between the
different stores, but these are basic supplies.

One thing not mentioned and very important for new users. WRITE PROTECT
that ADT disk. ADT will happily overwrite any formatted floppy in the
drive. It is also a good idea to label disks as soon as the copy is done
if you plan on making a lot in one setting.

-- 

Thanks for your time and interest in what I had to say.
I hope it was at least helpful and interesting.

Phoenyx
Apple II user since 04/84

Vist my web pages @

http://zip.to/Phoenyx_A2
http://www.tinyangeldesigns.com/Apple2/