[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Pinout for Disk II and IIc/IIc plus disk ports
- Subject: Re: Pinout for Disk II and IIc/IIc plus disk ports
- From: "Frank Townsend" <ftownsen@iamdigex.net>
- Date: 2000/07/16
- Newsgroups: comp.sys.apple2
- Organization: Intermedia iAmerica - http://www.iamworld.net
- References: <8kol57$fja$1@nnrp1.deja.com>
Bob:
While looking for a DB19 M/F cable, I found the following which sounds like
what you're looking for.
http://ground.ecn.uiowa.edu/apple2/MiscInfo/IIc/prout
It's apparently all from the Apple TIL:
External Floppy Drive Connector
-------------------------------
The Apple IIc external disk drive port is a DB-19 connector. The signals
available at the port are as follows:
10 - WRPROT
1 - GND
11 - SEEKPH0
2 - GND
12 - SEEKPH1
3 - GND
13 - SEEKPH2
4 - GND
14 - SEEKPH3
5 - +12V
15 - /WRREQ
6 - + 5V
16 - NC
7 - +12V
17 - /DR2
8 - +12V
18 - RDDATA
9 - /EXTINT
19 - WRDATA
bobryan9@my-deja.com wrote in message <8kol57$fja$1@nnrp1.deja.com>...
>I'm looking for the pinouts. I have a project in mind and I'd like to
>use the disk II controller to test it (i have plenty of them and I
>dont' mind if they fry).
>
>Bob
>
>
>Sent via Deja.com http://www.deja.com/
>Before you buy.