Re: AppleSoft Basic to text

[rich12345@my-deja.com]

In article <39400B96.B2B3431D@swbell.net>,
  rubywand@swbell.net wrote:
> 9999 PRINT CHR$(4)"OPEN PGMTEXT": PRINT CHR$(4)"WRITE PGMTEXT":
>   LIST 2,: PRINT CHR$(4)"CLOSE": END
>


I use this method to edit my robots BASIC programs in Hermes/Shadowrite
on my IIgs.  It is slow to switch between BASIC and the finder with BYE
because of the time it takes to mount all of the disks onto the desktop.

I'd like to setup my IIe with a super serial card, connected directly
to the GS serial port.  From there, I'd load DOS into the IIe, edit
programs with Hermes on the GS, and then send the programs directly to
the IIe with the serial card

On the IIe I'd type IN#2 (slot of the Serial card)
on the IIgs I'd choose PRINT from Hermes

MY QUESTION:  is there a printer driver for the GS that'll let me print
to the IIe, and have it do no formatting, etc, so I get the program in
the IIe's memory as if I'd EXEC'd a text file?


Rich


Sent via Deja.com http://www.deja.com/
Before you buy.