Re: Zlink Block Error Problems.

[Phoenyx <quazar@dcnet2000.com>]

Rubywand wrote:
>
>      Being able to do PC-->A2 disk image transfers with ADT
> validates a lot of things about your hardware setup.
> 
>      Try the ZLink setup mentioned earlier using Xmodem and a
> Hyperterm setup for 19200 baud, 8-N-1, Terminal= Auto-detect,
> ASCII Setup= nothing checked except "Wrap lines that exceed
> terminal width".
> 
> Rubywand

If he has access to earlier versions of Windows, I suggest using
the Windows 3.1 telecomm program. It is much simpler.

I also suggest checking the actual port settings in the system
available via control panel/system. Sometimes these will not
match the term program. From here, set flow control to xon/xoff
and not hardware.

-- 

Thank you for your time and interest. I hope it was helpful
or at least interesting.

Phoenyx,

Apple2 user since March 1984

Links to Phoenyx's pages:
preferred..... http://zip.to/Phoenyx_A2
alternate..... http://www.tinyangeldesigns.com/Apple2