Re: Apple Rev.C SCSI Jumpers

[dempson@actrix.gen.nz (David Empson)]

Wayne Stewart <waynes@intergate.bc.ca> wrote:

> I'll add add Apples opinion to mine fron page 9 of the
> "Apple II SCSI Card Owner's Guide" :
> "The computer"s priority is determined by the position
> of the jumper in the upper left-hand corner of the
> Apple II SCSI Card. It should be on the pins to the far
> right of the jumper block as shown in Figure 1-3."

And the "priority" is exactly the same thing as the SCSI ID, so we're
both right.

-- 
David Empson
dempson@actrix.gen.nz
Snail mail: P O Box 27-103, Wellington, New Zealand