Re: All this talk of a new GS...

[Jonas Bevren <jbevren@burninghorizon.com>]

I've found a nice on-line service, http://www.expresspcb.com/ 

These guys will give you a free CAD to help you lay out a PCB, and can even
give you good estimates on what it would cost to build the board.  I've used
it to design a few projects, and have seen most two-board prototype orders
around $90.  There is a (low) $70 setup fee, and some additional charges per
square inch, as well as a per-board setup.

They offer (at larger initial setup cost) fancies like the green coating and
lettering layers on top, but since they're only needed for production, it
wont be needed for those who dont need the fancy. =)

Have a look.  The software is for win95, and works ok here.  I has a few
quirks, which yelling easily solves (grin).


-Jonas

On Sat, 5 Feb 2000, Phoenyx wrote:

> Date: Sat, 05 Feb 2000 01:20:16 -0600
> From: Phoenyx <quazar@dcnet2000.com>
> Newsgroups: comp.sys.apple2
> Subject: Re: All this talk of a new GS...
> 
> That's an interesting idea, which follows my thoughts about a
> kit. I not real familiar with building boards, though I have
> repaired a few.
> 
> Phoenyx
>