Re: RamFAST and Audio CDs - HELP!

[supertimer@aol.com (Supertimer)]

 "Keith Meyers" <keith@wwnet.net> wrote:

>I've been having problems trying to play audio CDs on my IIgs.  I have a
>RamFAST board and have downloaded the 1.2 media drivers.  I have two CD-ROMs
>which I've tried, one is a NEC 6x and the other is a Plextor 32x.  The IIgs
>is a ROM 1 and the RamFAST is a ROM 3.00l (L...???)  Here's what I've done
>so far...
>
>Ran the install program to copy Media Device programs and drivers to the
>hard drive.  Copied both the RF.NEC and RF.SCSI2 files to the correct
>directory.  Ran Media Device setup through the control pannel.  Set a
>channel to "Port" RF.NEC or RF.SCSI2 (depending on drive being used), and am
>somewhat unsure of the "Device" setting.  I have the following:
>
>.CVTECH.S7.C
>.CVTECH.S7.D
>.DEV2
>MODEM
>GAMEPORT
>
>The top two seem to be related to the CD-ROM drive, for they were not there
>before it was installed.  I've tried the top three anyways, but when I
>launch the Media Control applet, the system crashes.
>
>Am I doing something wrong?

If you can run data CD-ROMs, then the hardware works and the
interface to the hardware works.  If audio CDs do not work, they
should not crash the system.  That the system crashes sounds
like something is wrong with the media controller or its
associated files.  Try installing a fresh copy to see if this is fixed.