Re: this laser 128 won't run adt.dmp

[Rubywand <rubywand@swbell.net>]

Supertimer writes ...
>
 ....
> The Laser works fine with
> 14.4k modems, unlike flawed IIc units.  The problem is
> the serial chip.  Lasers use a different one.  That's why
> they do not work with ADT.  For the same reason IIGS
> units won't work with ADT.
> 
 ....

     Yes; a different serial controller IC would explain the problem.

     Is there some simple way to set the 128's baud rate-- like a Control
Panel?



Rubywand