Stoll Weaver

[David Phillips <David_Phillips@nexus.amaq.org.au>]

I have just been asked for help by a weaving company. using a IIGS.

so Out I go to their factory and low and behold they are using a IIGS to
control this weaving machine. They use it to input paterns for the colars
that are woven by this machine. It has two proprietary boards one is in slot
seven and the other in slot 3 however the control panel setting are not
changed for them.

It appears that the 5' DOS disks are or do have errors as some of the
commands are not usable anymore they are labled.

Copyright 1979-91 by H Stoll GMBH & Co Reutlingen

They seem to be not available anymore.

I am going to try to get them to run on John McLeans 3.3 Launcher.

Has anyone head of this system and can anyone help with the original copy of
the program. The originals are corrupt and The firm is deserate.

The machines are old but working perfectly and it will cost $30,000 to
replace them. Since these machines are still doing what they were 
designed to this is a waste. They own the licence so there is no infringment
of copyright.



David Phillips
Vice President/Secretary
Apple Macintosh Association of QLD
Brisbane Australia