[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Using a PC to write IIGs-readable files
- Subject: Re: Using a PC to write IIGs-readable files
- From: supertimer@aol.com (Supertimer)
- Date: 1999/10/24
- Newsgroups: comp.sys.apple2
- Organization: AOL http://www.aol.com
- References: <zJqQ3.24461$Fj2.208896@news1.mia>
Mike Tulloch <"mtulloch"@n0_$pam.fit.edu> wrote:
>Is there software available to do this? Searching has turned up
>nothing...
You would need an SCSI Zip drive on the IIGS side.
Then you'd need a shareware program called MUG!
to read and write files to MS-DOS Zip disk. With
MUG!, you can transfer files back and forth between
MS-DOS and ProDOS or HFS but again this requires
a device such as the SCSI Zip drive from Iomega.
The neat thing about the SCSI Iomega Zip drive is
that it is truly plug and play on the IIGS. The
generic HD SCSI driver provided with IIGS System
6.0.1 runs the drive perfectly.