Re: CP/M card in A2 Platinum

[edhel@LOSETHECAPITALWORDSapple2.com (Edhel Iaur, Esq.)]

On Sun, 01 Aug 1999 07:26:30 GMT, gen_hp_gooberman@my-deja.com wrote:

...
>I have put a clock card, Z-80 card,

I assume this "Z-80 card" that you mentioned is the "CP/M card"
you mentioned earlier?  They're probably the same thing, and you
only need 1 :)

...
>is there anything else I might want to put in it?

If it was me building an "ultimate //e", I'd put these inside:
-Better power supply to power all those cards
-No-Slot clock
-10 MHz RocketChip, or an 8 MHz Zip Chip
-Apple Super Serial Card
-Turbo ASB chip for the Super Serial Card
-Phasor sound card, or RAMFactor III? (I'm not sure if you can use a
 Second Sight SVGA card simultaneously with the RAMWorks III)
-RAMWorks III memory card (I prefer the RAMFactor III, but it takes up
 another slot)
-Second Sight SVGA card
-Mouse card
-Apple 3.5" drive controller (the card that lets you use 1.44 MB
 drives)
-Unidisk 5.25" controller card
-RAMFast SCSI card

>I used to have a 1 meg RAM card, but swapped it for the clock.

Doh!  I hope it wasn't a "slinky" card, like Apple's, or a RAMFactor.