[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Found a Vulcan HD!
- Subject: Re: Found a Vulcan HD!
- From: CUTblakeney@home.com (Jeff Blakeney)
- Date: 1999/06/14
- Newsgroups: comp.sys.apple2
- Organization: Shaw@Home
- References: <btomlin-1206990943400001@10.27.64.5> <aux83.3105$Et6.245640@newsgate.direct.ca> <btomlin-1206992117440001@10.27.64.5> <hoR83.3256$Et6.273292@newsgate.direct.ca>
- Reply-to: CUTblakeney@home.com (Jeff Blakeney)
On Sun, 13 Jun 1999 16:55:41 GMT, mystix@direct.ca (Herbert Fung)
wrote:
>Well I'm not too sure on this but perhaps the Focus Hardcard controller might
>work? That would be cheaper, and I would also presume that you'd need some
>kind of adaptor to convert the connectors. Anyone have any thoughts on this?
The Focus card can be used with any IDE hard drive up to 2 GB (I
think). It will only allow you to hook up one IDE drive, though. You
need to make or buy an adapter cable to use it with standard 3.5" and
5.25" IDE drives. 2.5" drives just hook up to the card.
The Focus card can be used to control the hard drive in a Vulcan
unless the Vulcan has been converted to SCSI. :)
+------------------------------------------------------------------------+
| Jeff Blakeney - Dean of the Apple II University in A2Pro on Delphi |
| Delphi Apple II Forums Web Pages |
| A2: http://www.delphi.com/apple2 A2Pro: http://www.delphi.com/a2pro |
+------------------------------------------------------------------------+
HyperCard IIgs course now in session in the A2Pro forum on Delphi
Learn to Program in GSoft BASIC course now in session