[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Solder pads

Subject: Re: Solder pads
From: Doug Browning <wpg750@mb.imag.net>
Date: 1999/06/11
Newsgroups: comp.sys.apple2
Organization: MBnet Networking Inc.
References: <3750E37F.91C02786@intergate.bc.ca>
Reply-to: wpg750@mb.imag.net

The stickers just mean that the boards were tested and passed by the
quality control people at the factory. The solder pads allow the
conductors passing through the holes from the components to be soldered
to the foil traces. These are basic principals common to all electronics
construction, and not just to computers...

W Stewart wrote:

> On some clones of the Disk II card I notices some solder pads,
> mostly on the back.  All of these cards nave a sticker ï¿½Q.C.OKï¿½
> Anyone happen to know why theyï¿½re there?
>
>       Wayne

--
Doug Browning
dougbrow@mb.imag.net
www.mb.imag.net/~wpg750

References:
- Solder pads
  - From: W Stewart <waynes@intergate.bc.ca>

Prev by Date: Re: Help with an Apple IIe
Next by Date: Re: Shrinkit.Exe
Previous by thread: Solder pads
Next by thread: Re: Solder pads
Index(es):
- Date
- Thread