Re: GS front panel and additional LEDs

[Nick <spam@ix.netcom.com>]

They make bi-color LEDs, and they might even make tri-color LEDs, so you could look
for one of those and possibly simply replace the stock LED.

Herbert Fung wrote:

> In <3755AF21.89E540F1@intergate.bc.ca>, W Stewart <waynes@intergate.bc.ca> writes:
> >A good place to put one LED is right up against the green power
> >light under the front sloping cover. I used a red LED and found
> >that way it'd flash red when my ZipGS was working.
> >Saves drilling one hole.
>
> I thought about that and but there's only room for one LED and I'm planning on
> adding two, so I figure why not drill two holes.
>
> --
> Herbert Fung
> When replying please remove NOSPAM from the address
> mystix@direct.ca
> http://persweb.direct.ca/mystix/index.htm