[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: How to connect a Postscript-Printer to the serial Port the GS?
- Subject: Re: How to connect a Postscript-Printer to the serial Port the GS?
- From: supertimer@aol.com (Supertimer)
- Date: 1999/04/25
- Newsgroups: comp.sys.apple2
- Organization: AOL http://www.aol.com
- References: <7ftuj4$po2$1@n.ruf.uni-freiburg.de>
"news.uni-freiburg.de" <reesthil@uni-freiburg.de> wrote:
>I am trying to connect a Postscript-Printer (Kyocera FS800) t the serial
>Port of the GS. The Kyocera-Driver only support Apple-Talk. Does anyone
>know something about a driver for the serial-port? I know, there are some
>Hardware-solutions out there, but they are to expensive, i want to make it
>cheap...
>
>Thanks for any suggestion !
Just get a serial printer cable. You can AppleTalk through the serial
cable. The catch is that if you install the printer this way, you basically
take up its port (with phone-net, you can daisychain something else).