[no subject]

Thanks for the correction, Dennis.  I pulled out my NT/NTX manual and
reacquainted myself with the printer.  The 25 pin port is a serial port.
Only the the IINTX has the 50pin SCSI port (my mistake).

On the IINT, the cable from COM1: or COM2: should have 1 modem eliminator
in its path.  The switches on the IINT should be SW1-UP, SW2-DOWN for
9600 baud (No parity, 7data, 1stop) and PostScript emulation.

SW1-UP and SW2-UP enables appletalk (disables RS232 serial port).

  --Steve


-- 

 --Steve  (apple2pd@ground.ecn.uiowa.edu)