Re: ProTERM 3.1 and SupraFAXModem v.32bis

[ab616@chebucto.ns.ca (Tony Cianfaglione)]

   I use this init string:  ate1q0v1x4&c1&d2 s7=60 s11=55 s0=0^m
It works well with both my IIc and IIgs, when they're hooked to the Supra
14.4 and running ProTerm 3.1.

--------------------------------------------------------

John E. Townsend (utownje@lexis-nexis.com) wrote:
> I'm trying to get ProTERM 3.1 configured to work with my SupraFAXModem
> v.32bis (14.4K bps) on my Apple IIe and am having trouble getting the
> program to initialize the modem successfully.  ProTERM does list this
> modem in the setup window, but when I select it I get an error at
> initialization.  I am using an Apple SSC and have the DIP switches and
> jumper block set exactly the way the ProTERM manual describes (all on
> except for the first and last DIP switches).  I am able to communicate
> with the modem by forcing ProTERM into online mode and issuing an AT&F1
> (restore factory settings for Mac), but even putting this as the init
> string doesn't get ProTERM to initialize successfully.  It will
> initialize OK if I select one of the generic modem drivers, but I
> suspect that this is not the best solution.  Is there something I can
> change in the SupraFAXModem v.32bis driver that will allow it to work?

> --
> John E. Townsend
> Sr. Software Engineer          "Machines should work;
> LEXIS-NEXIS                     people should think."
> Dayton, OH, USA                        -- IBM Polyanna Principle
> utownje@lexis-nexis.com