Re: Magnavox Professional Monitor

[gospodin@clubi.ie (Vincent Quinn)]

In article <74rdv5$o1m$1@nnrp1.dejanews.com>,
liftarn@my-dejanews.com wrote:

>> If this is the same as the Commodore Amiga and Philips CM 8833/II monitors,
>> the following cable pinouts work with the GS. Perhaps these should be
>> included in the FAQ?
>> a) If your monitor has a 9-pin D analogue input:
>> b) If your monitor has a SCART analogue input:
>
>You never mentioned c) If the monitor has a 25-pin D analogue input. The one
>on my Mitsubishu EUM-1481A has that port and I would like to know if anyone
>knows the pinout of that port. Please e-mail me as I rarley read this group.


I didn't mention it 'cause I don't know it! However, just last week I was
given a Princeton Graphic Systems 14-inch monitor, vintage 1988, with a
25-pin input and an analogue/TTL switch mounted next to it. The cable that
was plugged in has a 15-pin VGA high density plug at its other end. I
traced the wires and built a Apple-type 15-pin D to 25-pin D cable, but I
get no display with the GS. Anyone know if it will work?

BTW, I appear to have fixed my temperamental Commodore 1084S: hairline
cracks in the solder joints around the HT seem to have been the source of
the heat-related flaking out :-)

Vincent Q