[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: UniDisk 3.5 problem
- Subject: Re: UniDisk 3.5 problem
- From: Jeff.Brielmaier@juge.com (Jeff Brielmaier)
- Date: 1998/11/29
- Newsgroups: comp.sys.apple2
- Organization: COMM Port OS/2 VMBBS 204.89.247.1
- References: <73p47e$cvo$1@supernews.com> <73p7l0$s7v$1@opal.southwind.net>
sR>Jason Whorton <jason@microxl.com> wrote:
sR>:Hello. I bought a UniDisk 3.5 and am trying to use it with a IIc that
sR>:reports "0" when I type in print peek (64447). I get a "Device not Ready"
sR>:error when I try to enter CAT, D2. Does anyone have any idea of what might
sR>:be causing that?
sR>
sR>Well since the first 3.5 is S5, D1 and you accessed D2, I figure the system
sR>tried S6, D2 which is where it expects to find the second 5.25 drive.
Jason, if your //c reports a "0" then it does not support the UniDisk3.5.
You will need a motherboard swap (one that reports at least "1") in order
to use the UniDisk3.5 on the //c.
* KingQWK 1.05 # [PK] * ERROR! KITTY.COM virus scan has eaten the MOUSE
driver