[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Mounting TWGS so it doesn't use a slot

Subject: Re: Mounting TWGS so it doesn't use a slot
From: kenny <kenny1@ulster.net>
Date: 1998/11/23
Newsgroups: comp.sys.apple2
Organization: Posted via Supernews, http://www.supernews.com - Discussions start here!
References: <36368A4D.2B2AE452@hotmail.com>

I have a dead gs do you have any info on the twgs. The led comes on and
stays on but all I get on the screen is what looks like a checker board.

_J_S_ wrote:

> I've heard that the TWGS only needs to get power from the slot
> connector, an there is also some sort of contact so the TWGS can receive
> commands (Slow/Fast/Transwarp)
>
> I've got a few extra slot connectors.  What connections should there be
> on the connector?  GND, +5v, what else?

References:
- Mounting TWGS so it doesn't use a slot
  - From: _J_S_ <jsmith66@hotmail.com>

Prev by Date: Need info on a Transwarpgs board
Next by Date: Re: Apple GS RGB monitor question, are the leads reversible that connect from the GS to monitor?
Previous by thread: Mounting TWGS so it doesn't use a slot
Next by thread: Re: Mounting TWGS so it doesn't use a slot
Index(es):
- Date
- Thread