Re: ProTERM 3.1

[supertimer@aol.com (Supertimer)]

bg146@lafn.org (Al Kalal) wrote:

>I have a slight problem with ProTERM 3.1.  I'm using an Apple IIc+ with 
>it & I recently bought a used 9600 baud modem.  Eveything works fine at 
>9600 baud except I can't copy anything to my ISPs editor for sending e-mail.
>
>OA-D (Send Ascii),  OA-Y (Paste to Modem) or OA-C (Copy to clipboard) 
>then OA-V (Copy from clipboard) will not work.  PT3.1 just freezes, 
>nothing other than the first or second line gets thru.
>
>Now if I change the baud rate to 2400, ALL of the above commands work !  
>But that means I have to leave my connection to my ISP, change the baud 
>rate from 9600 to 2400 & then re-connect.  That is a pain in you know 
>what !   Anybody have any ideas ??     Thanks.       .......Al

I'm pretty sure you are overloading your ISP's editor.

Try slowing down ProTERM.  Change the character send speed, for
example, to 80/100 to slow it down.  Also change the line send speed,
slowing it down.

The other way you can do it is to upload the file to your ISP, then
attach that file to an empty email.  Some email programs will automatically
generate a plain text email from this.  Good luck....