Re: Magnavox Professional Monitor

[supertimer@aol.com (Supertimer)]

gospodin@clubi.ie (Vincent Quinn) wrote:

>b) If your monitor has a SCART analogue input:
>
>GS 15-pin male D plug--------monitor SCART 20-pin plug
>
> 2 (red video)---------------15
> 3 (composite sync)----------20
> 5 (green video)-------------11			
> 9 (blue video)---------------7
>13 (blue ground)--------------5
>
>If the monitor has the built-in stereo speakers with input via the SCART
>(ie, no RCA audio jacks), the connection is:
>
>IIGS end (3.5 mm stereo jack plug)---SCART 20-pin plug
>
>tip (audio L)------------------------2
>body (audio R)-----------------------6
>shield (audio common)----------------4
>
>However, I've found that the audio signal from the GS sound output jack is
>not adequate to drive the speakers.

It is more than adequate.  You just have to set the volume in the control
panel to go a little higher than default.