[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: PC transporter drives
In article <david.910922448@wraith>,
david@uow.edu.au (David Wilson) wrote:
>Hang on, there is no way you are going to be able to connect a PC 360KB drive
>to an Apple 19 pin disk port (well, I do have a drive that is a standard
>PC style drive with an adapter board that makes it emulate a Disk ][ drive)
>and read PC 360KB disks.
OK - but this drive is to be hooked up to the 19-pin port on the
_PCTransporter_ rather than to the GS 19-pin port and it is intended to
operate only under PC Transporter.
The PCT TransDrive that hooks up to this port is (I believe) a standard PC
360K 5.25 floppy with a converter cable: if so, there should be no problem
hooking up any other standard 360K PC drive to PCT.
I believe someone around comp.sys.apple2 has done this - I remember a post
around three(?) months ago - but there were no pinouts given. Anyone?
Vincent Q