[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: SCSI Termination Power

Subject: Re: SCSI Termination Power
From: Patrick Schaefer <pa.schaefer@fz-juelich.de>
Date: 1998/09/29
Newsgroups: comp.sys.apple2
Organization: Forschungszentrum Juelich GmbH
References: <360C7B32.88A94ECD@lexis-nexis.com>
Reply-to: pa.schaefer@fz-juelich.de

John E. Townsend wrote:

> Now I have another problem. :-)  The drive I want to use on the IIe (a
> 1988 vintage 40MB 3.5" Quantum mechanism that I took out of a Mac SE/30)
> doesn't seem to be providing SCSI termination power.  I figured this out

The ProDrive 40S does provide TermPower. If yours does not, you should
check the fuse. This is the small rectangular part (3mm x 12mm) next to
the WS/EP/SS jumper block.

Patrick

Follow-Ups:
- Re: SCSI Termination Power
  - From: "John E. Townsend" <utownje@lexis-nexis.com>

References:
- SCSI Termination Power
  - From: "John E. Townsend" <utownje@lexis-nexis.com>

Prev by Date: Best Parallel Card suited for use with Bubble, Ink, DeskJet or Laser Printers?
Next by Date: Re: Best Parallel Card suited for use with Bubble, Ink, DeskJet or Laser Printers?
Previous by thread: Re: SCSI Termination Power
Next by thread: Re: SCSI Termination Power
Index(es):
- Date
- Thread