[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Final Solution, was Re: Error #4 on TransWarp

Geoff Body wrote:
> I had a look at the photo of your transwarps in the IIe and it looks
> like switch 6 of block 2 is in the closed state (fast access to slot).
> Try setting switch 6 of block 2 open (slow speed) and see if you get
> error #4.
> 
> Geoff
>

You just helped me solve it! Thanks!

For the record:

Error #4 comes up when the DIP switch in bank 2 (that's the one on the
right) for Slot 6 is set to Fast speed. When it is set to normal speed, the
self-test completes OK.

-- 
Mac GUI Vault - A source for retro Apple II and
Macintosh computing.
http://macgui.com/vault/