[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Zip Plus & Apple IIGS



David Empson writes ...
> 
> Steve Sanders <robsan19@popalex1.linknet.net> wrote:
> 
> > I am thinking of buying an Iomega Zip Plus removeable disk drive to use
> > with my Apple IIGS. I currently have a RamFast SCSI, ROM Rev 3.01e
> > connected to a 40 meg Q-Drive.
> 
> Bad idea.  The Zip Plus has problems if there are other devices on the
> SCSI chain.  Its auto-detection of SCSI vs Parallel is fragile, to say
> the least.  (This applies to all platforms, not specifically the
> RamFast.)
>

     It's nice to have this information. Our Zip Drive is the standard
SCSI model. It works great as an 'extra hard disk'.


 
> Get a standard Zip instead, and save money in the process. 

 ....

> 
> >       Any special procedures to format the Zip disks?
> 
> You might not be able to do a low level format without a Macintosh or PC
> to run the Zip Tools software, but I've never used a Zip with a RamFast,
> so I can't be sure of this.
> 
> You definitely cannot use the password protection feature.
> 
 ....

     Yes; mainly, you have something that looks and works like a SCSI
hard disk which happens to have swap-able media. The PC (or Mac) tools
would be nice (e.g. to change the Sleep delay); but, you don't have
access to them on the GS and, really, do not need them.

     Zip disks come formatted; so, unless they get messed up some how,
you just need to do a Partition via the RamFAST utilities (i.e.
ramfast.system) to use a disk. The RamFAST utilities can do a low-level
Format, too. It works fine.

 


Rubywand