Re: Disk to .PO format???

[Rubywand <rubywand@swbell.net>]

TWS writes ...
> 
> I got XGS to run.  I only have one disk image though (the one that comes
> with XGS)
> 
> I'd like to convert some of my software to .2IMG format.  I did some
> searching, and the only way I can figure out how to do DISK--->.2IMG is
> like this:
 ....
> 
> Any suggestions?  Also, I found a place on the net that refers to
> 
> ftp://ground.isca.uiowa.edu/2/apple2/Faqs/emul.dsk
> ftp://ground.isca.uiowa.edu/2/apple2/Faqs/emul2.dsk
> 
> These files are supposed to contain an article that explains how to
> convert from DISKS to .2IMG files.  The EMUL files are not in the /FAQS
> directory.


     This sounds like a fairly old reference-- like, at least 6-7
months! The file emulators133.971004 mentions .2img format several
times. It can be found at ...

ftp://ground.isca.uiowa.edu/2/apple2/Faqs/OldFaqs/ .


     A good place to ask this question should be 

comp.sys.apple2.emmulator .


     You can also check info at XGS sites, such as

http://classicgaming.com/xgsdos/ . 

 
Rubywand