Re: Direct Cable file transfer

[supertimer@aol.com (Supertimer)]

ljsilicon@aol.com (LJSILICON) wrote:

>Supertimer wrote...
>
>>set the COMPUTERS at 56,700.
>
>I have ProTerm 3.0 and I cannot set the output speed on my GS to 56,700.
>38,400 is the highest that ProTerm will allow and this is double what the
>GS control panel will allow.

ProTerm 3.0 maxes out at 38,400.  ProTerm 3.1 fixes the problem and
supports 56,700.  If you have the original disks, you should contact Intec
about upgrading.  The extra speed (and features) is worth it...

The ability to set 56,700 is especially valuable if you have an IIGS
accelerator such and do lots of cable transfers (null modem) or fast
modem transfers.