[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Internal SCSI-2 disk installation

Subject: Internal SCSI-2 disk installation
From: domain <domain@dial.eunet.ch>
Date: 1998/03/02
Newsgroups: comp.sys.apple, comp.sys.apple2, comp.sys.apple2.usergroups
Organization: EUnet AG

I just installed  a Quantum Atlas II SCSI-2 internal disk on my PowerMac
6500.
I'm using SCSI ID 2 for the disk, the internal CD-ROM is on SCSI 4.
I'm a little bit disapointed by the performances of the disk (less than
the internal Fireball IDE original disk).  I'm now looking for somebody
to give me following advices :
Is it correct ot put the new Atlas II on a SCSI ID lower than the CD-ROM
?
Do I have to leave the termination enabled for this internal drive ?

Follow-Ups:
- Re: Internal SCSI-2 disk installation
  - From: notme@address-in-sig.nospam (Jim Howe)

Prev by Date: mac and FTP servers
Next by Date: Re: Still need help: Apple II <-> Macintosh
Previous by thread: mac and FTP servers
Next by thread: Re: Internal SCSI-2 disk installation
Index(es):
- Date
- Thread