Re: iigs rgb pinouts

[nathan@visi.com (Nathan Mates)]

In article <34694035.2302759@news.uslink.net>,
Eric Krueger <warrior@uslink.net> wrote:
>I'm wanting to use a iigs rgb monitor on an amiga. So I need the
>pinouts for the rgb connector or cable... Any help would be great!!!

   See http://www.visi.com/~nathan/a2/faq/pinouts.html for this and
more, but here's a copy:

  IIGS RGB Connector:
                        
        pin #             signal
         1                ground (for red ?)                                 
         2                red 
         3                composite sync. 
         4                not used                                     
         5                green       
         6                ground (for green ?)
         7                -5 V
         8                +12 V                     
         9                blue                
         10               not used
         11               audio output (not used)
         12               monochrome screen off (???)
         13               ground (for blue ?)
         14               not used                                    
         15               not used             
                          system ground      
                             |
                             |
                   __________|_____________________________
                   \ 8    7    6    5    4    3    2    1 /
                    \  15   14   13   12   11   10    9  /
                     ------------------------------------                    
         
Nathan Mates
--
<*> Nathan Mates http://www.visi.com/~nathan/      <*>
# This posting is copyright Nathan Mates, and may not be reprinted
# in full, partial, or quoted form on any archive site associated with
# Charles Turley.