Re: Mac Recognizing a ProDos volume

[Daryl Morgan <dcm@s2.sonnet.com>]

>Solution: Install PC Exchange, reboot.  Make sure the device you're trying 
>to read is hooked up and turned on.  Open the PC Exchange control panel.
>click on the Options button.  Put a checkmark next to the device that isn't
>mounting.  Now you have to reboot again I think.
>
>Your device will *finally* show up on the desktop.

I tried that but it didn't work.

  The problem is that my RamFast SCSI card died, so my IIgs can no longer
access the hard drive (or even boot with it installed). I wanted to try to 
retrieve files and run some of the stuff on the Mac using an emulator.
   -dcm-