Re: MS Z-80 Softcard & IIgs

[dlw@neosoft.com (David Williams)]

In article <5tnnq0$dti@catapult.gatech.edu>, gt5460c@acmez.gatech.edu (Martin Tuck) wrote:
>        Mine works great in my ROM 1 gs.  If you haven't already, try
>changing the gs speed to "normal" in the control panel.  This is
>imperative because the MS Softcard can't handle the high speed clocked
>stuff spewing down the bus at it.

I check, cpu speed is set to "normal".

I rechecked the card and disks on my Apple ][+ just to make sure it worked.  
Everything was fine there and on the IIe.  I've also discovered that if I hit 
"reset" 3 or 4 times it starts working on the gs.  Sometimes though the lines 
are double spaced and it never seems to recognize a "ctrl-c".  BTW, if it 
makes any difference, my gs is a ROM 3 and the Softcard is a 1980 Softcard, 
not the Softcard II MS released later.  Tried both a 44k and 56k CP/M 2.2 with 
the same results.

Anyone have any other ideas?

-----
David Williams
dlw@neosoft.com
http://www.neosoft.com/~dlw