Re: TransWarp and RAMFactor

[Warren Ernst <wernst@gmail.com>]

On Aug 19, 4:05 am, KP <kjpm...@gmail.com> wrote:
> On Aug 19, 1:55 am, "ict@ccess" <gids...@sasktel.net> wrote:
>
> > KP wrote:
> > > Does installing a RAMFactor in a IIe running a TransWarp require
> > > changing any of the DIP Switch settings on the TW?  Or, given that the
> > > RAMFactor is a standard Slot 1-7 card (rather than an Aux Slot card),
> > > is no DIP Switch setting change necessary?
>
> > No dip switch settings are necessary.  I use my Ramfactor on a IIGS
> > with a Zip running at 12 Mhz without any problems.
>
> > Rob
>
> Not a IIgs.  This is a IIe with an original AE TransWarp running at
> 3.3 mHz.  Does that change the answer?
>
> My concern is re the TransWarp DIP settings, not the RAMFactor ones.

I have a Transwarp (1) and RamFactor in my //e.

As I recall, you can leave the slot the RamFactor is in at High Speed
as far as the TW DIP switches are concerned.

I *think* I tried to benchmark any differences in that DIP switch
setting 20 years ago and couldn't measure a difference, but as I said,
it was very long ago.

-Warr