Re: Laser 128

["Kevin Davidson" <kdavidso@enteract.com>]

Let me know if you (or anybody else out there) gets ADT 1.21 (Apple Disk
Transfer) working with the Laser 128.  I have not been able to transfer
data from the PC to the Laser due to the ADT program expecting the serial
port to be at a different address (using the serial port on the Laser).  I
have also tried a Super Serial Card in slot 7 with no success (this works
fine in my //e)...  

Kevin
kdavidso@enteract.com  

Eric Shepherd <eshepher@quicksilver.com> wrote in article
<5rqkog$q0s@news1.intelenet.net>...
> Ray Saeman <sands@itis.com> wrote:
> 
> >I just got a laser 128 with out the power supply.  Can I substitute
> >somthing else? 
> 
> I'm not sure.
> 
> >How compatible is this computer with my Apple gs and my Apple IIe? 
> 
> The Laser 128 is almost 100% compatible with the Apple //e, but it
> won't run IIgs software.  I say "almost 100%" because I think there
> were one or two relatively obscure programs that didn't work on the
> Laser 128.
>