Re: WTB SCSI HD

["Dan Yertzell" <Dan-Yertzell@worldnet.att.net>]

Mitchell Spector <spec@vax2.concordia.ca> wrote in article 
>     If you already have a SCSI interface card installed (i.e. RamFAST,
> Apple HS or Rev C) there is no reason you need to shop Apple II vendors
> to find a SCSI hardrive. SCSI is SCSI, there is no such thing as an
> Apple II-specific SCSI hardrive. In fact, quite often you'll be paying
> more for a drive from such a vendor than you would elsewhere (Scantron
> Quality Computers is a perfect example of paying more than you should
> for a so-called "Apple II hardrive").

Actually, I originally was only looking for a case & cable, as I have a
bare drive and SCSI cards.  In the end, I bought a complete 100 meg system
from a vendor here, and will also buy another case for the drive I have.

BTW, my apple SCSI card looks to be a REV A (#607-0291-A, c 1986).  The ROM
says "341-0437-A".  But I know it was used in this //GS by the previous
owner, in fact the box and manual state "For the II+, //e and IIGS".  So
what's the deal?  Everyone seems to be saying a REV C is needed to work in
a IIGS?

Dan