[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: 1080 to iigs monitor problems
- To: Mark Frischknecht
- Subject: Re: 1080 to iigs monitor problems
- From: "BluPhoenyx" <bluphoenyx@a2central.com.remove-czw-this>
- Date: Fri, 6 Aug 2010 19:15:23 -0500
- In-reply-to: <2010080616323716807-appleiiguy@gmailcom>
- Newsgroups: comp.sys.apple2
- Organization: A2Central.com
- References: <2010080616323716807-appleiiguy@gmailcom>
- User-agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.11) Gecko/20100713 Thunderbird/3.0.6
- Xref: g2news1.google.com comp.sys.apple2:17483
To: Mark Frischknecht
On 08/06/2010 06:32 PM, Mark Frischknecht wrote:
I made a IIGS RGB to Amiga 1084 Cable for my Amiga 1080 monitor.
According to all the information online the dsub 9 pinouts are the same.
Amiga Dsub9 Apple Dsub15
Pin 1 to pin 13
Pin 3 to pin 2
Pin 4 to pin 5
Pin 5 to pin 9
Pin 7 to pin 3
The cable checks out fine with my multimeter
On my Amiga 1080 monitor the switch in front is set to RGB and the RGB
mode selection switch on the rear of the monitor is set to Analog.
I get a blank display except when moving the switch between RGB Digital
and RGB Analog on the back. When I move the switch on the back I get a
momentary view of my IIGS desktop.
Anybody have any idea of what I can to to solve this?
The monitor works fine in composite mode.
Since you do see something, perhaps the switch is dirty or faulty.
Cheers,
Mike T