Re: Help with ProDOS commands please..

["Dr. Wolfgang Otrebski" <wolfgang.otrebski@siemens.at>]

gournay wrote:
> 
> takeuchi@cgl.ucsf.edu wrote:
> >
> > I used to use an Apple II, but it is long gone, however, I
> > discovered emulation and it lives again!  Unfortunately I
> > forgot all the commands :(.  The only one I remember is
> > CAT and CATALOG.  Unfortunately I don't know how to switch
> > disk drives etc...
> >
> > Is there a cheat sheet anywhere for these commands?  I tried
> > the FAQ's but didn't have much luck.
> >
> > Thanks for any help!
> >
> > Toshi
> > takeuchi@cgl.ucsf.edu
> 
> Hi!
> 
> For example, to change drives, you must enter this sort of command:
> 
> CATALOG,Sx,Dy  where x is the slot where you insert the card to connect
> your drives and y is the number of the drive.
> 
> If you want more informations, let me know, make a list of commands and
> I'll try to hell you as well as I can.
> 
> Bye
The original Apple Prodos manual should lurk about somewhere,
but not long ago I read on the NG that Beneath Apple Dos was still
in print/stock at Quality Software. Maybe Beneath Apple Prodos is
also...
Good Luck,
wolfgang 
-- 
Standard disclaimer applies (anyone following advice given here does so
at her/his own risk - I speak for myself and not for my employer).